Table of Contents
Palm trees are beautiful to have in your yard, but they can also be a pain when removing them. They grow quickly, and some of the larger ones can get out of control. You may want to cut down a palm tree that you don’t need anymore or one that is diseased.
Palm trees are a staple of the tropics and subtropics, but they can be incredibly difficult to get rid of. They take up so much space, have an expansive root system, and are very expensive to remove. Fortunately, there is one quick way to get rid of them – cutting down palms!
The best way to do this is by cutting down palms! Here’s how:
As suggested by Ben McInerney, certified arborist from GoTreeQuotes.com.au, you have to cut away all visible roots or stumps holding onto the ground around your tree. This will ensure that it won’t continue growing in place after you’ve removed it from its original position.
Once this is done, you need to cut down the trunk of your palm tree. Ideally, this should be done in sections that are about one foot long each. This will make it easier for you to move them out of the way and dispose of them properly with a chipper or at a landfill, so they don’t rot on site.
But that’s easier said than done as many palm trunks are incredibly thick and hard to cut down. You’ll need a chainsaw or other similar power saw for this part of the process, which means that you have to be strong enough to operate it safely.
Once your trunk is in sections, remove them from the site carefully, so they don’t damage anything else on their way out.
Once the trunk is removed, you’ll be left with a stump that can easily rot away on its own within one to two years if it’s not watered or cared for in any other way.
It sounds simple enough, but cutting down palms isn’t easy and takes some time and effort to do properly. However, once your palm tree is gone, you’ll be left with a nice plot of land that you can use for other purposes.
Factors to consider when removing a palm tree
There are a few factors that you need to consider when removing a palm tree. These include:
The size of your trunk
Smaller trunks can be cut down by hand, but larger ones will require power tools like chainsaws and mauls. Some assume that height is the only factor to consider when doing this, but they forget that trunk size is also important.
The location of your palm tree
If it’s located in an area where you can’t cut down or operate a chainsaw safely, then you’ll have to hire someone else to do the job for you. This requires some planning ahead before you start cutting down your tree.
The type of palm you have
Some palms are easier to cut than others, and you must know the difference beforehand to prepare accordingly for this part of the job. This includes knowing how far up into the canopy they spread, their overall size, and what other obstacles might need to be cut down to make room for them.
How many trees do you have
Obviously, the more trees you have to remove, the longer it’s going to take. It also means that your job is big enough that you’ll need multiple people working together for this part of the project to go smoothly and safely. This will cost more, but it’s better than trying to do this job yourself and not having enough people.
How much money do you have
The cost of removing a tree will vary depending on the size, type, location, etc. You’ll also need to factor in travel expenses if necessary, as well as additional tools that may be needed for the task.
It won’t cost a lot to cut down palms, but it will take time and effort. Some people also prefer to hire someone else for this part of the job, so they don’t have to deal with the hassle themselves.
Once you’ve considered these factors, then it’s time to get rid of your palm tree! Have someone help if possible and keep small children away from the site as there may still be debris that can hurt or crush them.
The best way to remove a large palm tree is by cutting it down into sections. Ensure that you have the right tools for the job beforehand and take your time cutting down each section of the trunk, so they don’t cause damage to anything else on their way out.
DIY vs. Arborist
You may be wondering whether you should attempt to do this yourself or hire an arborist for the job. The answer depends on your experience level and how much money you want to remove palm trees.
DIY-friendly palms
If you have small, thin trunks that are easy to cut down with a chainsaw, then you may be able to do it yourself. But if your trunk is thick and hard to cut down, consider hiring an arborist for the job instead, as they’ll have the right tools needed to remove them from your site safely.
DIY-saving palms
If you don’t want to spend money on this type of work but still want to save some trees, then consider cutting down palm trees on your own. Ensure you have the right tools for the job and wear protective gear while you work, so nothing goes wrong.
Hiring an arborist
If you don’t feel comfortable doing this yourself or too big of a task for one person, consider hiring an arborist for the job. They will have all of the tools needed to safely remove your trunk and can get rid of it once they’re done without causing any damage or mess on site.
Working with a professional company
If you want someone who has experience working in these types of conditions, then don’t hesitate to contact a company for help. They’ll have the tools needed to safely remove your trunk and can even dispose of it, so you don’t need to worry about what will happen with it afterward.
